Owner`s manual
8 www.durasportspas.com
120V to 240 V
Conversion
(North America 60hZ)
Some spa owners choose to have their spa con-
verted from 120V operation to 240V operation for
greater energy efficiency.
#!,))0)'86-'%0'-6'9-8
1978&)-278%00)(&=%0-')27)()0)'
86-'%0'3286%'836%2(%4463:)(&=%
03'%0&9-0(-2+36)0)'86-'%0-274)'836
%-096)83'3140=;-8,78%8)%2(03'%0
'3()71%=6)7908-2*-6)364)6732%0-2.96=
%2(;-00&)8,)730)6)74327-&-0-8=3*8,)74%
3;2)6
The steps to converting your spa from 120V
to 240V operation are shown below and must
be completed by a licensed electrician.
Power supply installation must include a properly
rated GFCI circuit breaker. The circuit must be dedi-
cated and should not be shared with any other ap-
pliances. It should be labeled and easily accessible to
users. The power supply must be hard wired into
the power pack. A hole may be drilled through the
resin cabinet near the electrical pack to accommo-
date wiring. Foam insulation may be sprayed around
the hole to fill any gaps between the cabinet and the
wiring.
!
Step 1.
Disconnect jumper
from WHT AC.
Step 2.
Disconnect other end of same
jumper from RED AC.
DO NOT DISCONNECT ANY OTHER
JUMPERS!
Note: All connectors in WHT AC are
interchangeable and the same is true of
all connections in RED AC.
Prepare for Your New Spa