Data Sheet

 Chemical process, in the heat conduction and magnetic conductivity performance is better than
other metals, the following is the operation process：
 Prepare 2 pieces of cotton cloth
 Prepare a special handle
 Prepare special silicone sleeve
 Smooth the cotton cloth and place the handle in the middle of the gauze
 The cotton around the handle is raised to wrap the handle
 Install the silicone sleeve from bottom to top to tighten the handle
 Assemble the handle of the silicone sleeve
Connect special handle
1. Unscrew the two assembled handles separately from the water addition nut, and
carefully add 50∽60 ° C hot water, tighten the nut to prevent the water inside the
handle from leaking out.
2. After the two handles are ready, connect the instrument and the two handles
with each other using a special connection wire
The use of methods
Start the instrument
1、After the power supply and handle are connected, press the power switch,
and the instrument indicator light indicates red light
operation interface
2、After starting the instrument, the screen appears the startup LOGO page
jumps to the animation interface. When the interface jumps to "the device has
started", the next step, please connect the WIFI
Connect to WIFI
3、Click and long press on the top of the upper right corner of the display
screen, slide out of the WiFi connection interface, click and long press the icon of
WiFi, the interface of the name of WiFi connection pops up, click the name of the
required WiFi connection, enter the password, the WiFi connection is displayed,
click to return to the WiFi connection interface, and enter the startup interface
Conditioning options
1. Enter the instrument conditioning operation interface, the control unit can be
divided into conditioning options, strength control, start and stop control.