User Manual
Table Of Contents
- UPDATING THE SWITCH UP™ DEVICE
- MODE ACTIVATION
- CONTROLLER SUPPORT
- CONTROLLER CONVERSION TABLE
- RESET BUTTON MAPPING
- PAIRING A PS5™ CONTROLLER (BLUETOOTH)
- PAIRING A PS4™ CONTROLLER (BLUETOOTH)
- PAIRING A PS3™ CONTROLLER (BLUETOOTH)
- PAIRING AN XBOX® ONE™ CONTROLLER (BLUETOOTH)
- PAIRING AN XBOX® ONE™/SERIES™ CONTROLLER (ADAPTER)
- PAIRING AN XBOX® 360™ CONTROLLER (ADAPTER)
- PAIRING A SWITCH™ PRO CONTROLLER (BLUETOOTH)
- PAIRING A WII U™ PRO CONTROLLER (BLUETOOTH)
- PAIRING THE JOY-CONS™ (BLUETOOTH)
- XBOX® ONE™ ELITE CONTROLLER SERIES 1 PADDLE MAPPING
- STRIKEPACK™ PADDLE/ACTION BUTTON MAPPING
- CONTROLLER HEADSET SUPPORT
- OPTIONAL BUTTON SWAP
- POKÉMON™ MODE OVERVIEW
- POKÉMON™ MODE ACTIVATION
- MENU MODE
- LOAD TIME ADJUSTABLE
- LANGUAGE SELECTION
- ANALOG STICK DEADZONE
- SINGLE RELEASE POKÉMON™
- BOX RELEASE POKÉMON™
- SHINY EGG CHAINING
- EASY CYCLE
- SHINY SOFT RESET CHAINING
- MAX RAID WATT GENERATOR
- RARE DEN FARMING
- AUTO CONFIRM
- AUTO SPIN
- AUTO ROTO LOTO (MASTER BALL FARMING)
- BOX SURPRISE TRADE
- EGG FARMING (ADVANCED SHINY CHAINING)
- BOX EGG HATCHING (ADVANCED SHINY CHAINING)
- APRICORN FARMING
- TIP & TRICKS
- ANIMAL CROSSING™ MODE OVERVIEW
- MACRO RECORDER MODE OVERVIEW
- FORTNITE™ MODE OVERVIEW
- ZELDA™ MODE OVERVIEW
- MARIO™ MODE OVERVIEW
pg. 14/104
PAIRING AN XBOX® ONE™ CONTROLLER
(BLUETOOTH)
Xbox® One™ Wireless Bluetooth Controller Pairing -
Simply put your Xbox® One™ controller into sync mode and press the
Bluetooth Sync button on your Switch Up™ device. This method WILL
NOT work for the Xbox® Wireless Controller (Model 1914, Series™ X/S),
older Xbox® One™ controllers (1537, 1697), or the Elite Series 1 or 2.
Step by step instructions below:
1. Ensure that your Switch Up™ device is plugged into the Switch™
via the Dock or an OTG cable.
2. Turn on your Xbox® One™ Wireless Bluetooth Controller.
3. Press the SYNC button on your controller.
4. Now press the Bluetooth pairing button on the Switch Up™ device.
The LED will flash BLUE to show that Bluetooth pairing has begun.
5. Within 30 seconds the LED will be WHITE on the Switch Up™
device and the Xbox® One™ Wireless Bluetooth Controller will vibrate
indicating that pairing is complete.
6. You are now connected to the Switch Up™ device and ready to use
your Xbox® One™ Bluetooth Controller wirelessly. If your controller is
still NOT connected, remove the batteries then re-insert them, then
repeat the process above.
NOTE: The controller’s SYNC button can be used as the CAPTURE button.