User Manual

pg. 15/104
PAIRING AN XBOX® ONE™/SERIES™ CONTROLLER
(ADAPTER)
Xbox® One™/Series™ Wireless Controller With
Adapter Pairing
An official Xbox® Wireless Adapter (sold separately) is the
recommended method for connecting ALL Xbox® One™ / Series™
controllers to the Switch Up™ device. However, for the following
Xbox® controllers, the adapter is REQUIRED to connect
wirelessly:
Non-Bluetooth Xbox® One™ Controller (Models 1537, 1697).
Xbox® Wireless Controller (Model 1914, Series™ X/S).
Xbox® One™ Elite Series 1 Controller (Model 1698).
Xbox® One™ Elite Series 2 Controller (Model 1797).
Step by step instructions below:
1. Ensure that your Switch Up™ device is plugged into the Switch™
via the Dock or an OTG cable.
Important:
If this is the very first time you are using the Xbox® Wireless Adapter
with the Switch Up™ you will need to do step 1a.
1a. Plug the Xbox® Wireless Adapter into your Switch Up™ device
for 20 seconds. Afterwards, unplug the Adapter and continue to
step 2.