User Manual
Table Of Contents
- UPDATING THE SWITCH UP™ DEVICE
- MODE ACTIVATION
- CONTROLLER SUPPORT
- CONTROLLER CONVERSION TABLE
- RESET BUTTON MAPPING
- PAIRING A PS5™ CONTROLLER (BLUETOOTH)
- PAIRING A PS4™ CONTROLLER (BLUETOOTH)
- PAIRING A PS3™ CONTROLLER (BLUETOOTH)
- PAIRING AN XBOX® ONE™ CONTROLLER (BLUETOOTH)
- PAIRING AN XBOX® ONE™/SERIES™ CONTROLLER (ADAPTER)
- PAIRING AN XBOX® 360™ CONTROLLER (ADAPTER)
- PAIRING A SWITCH™ PRO CONTROLLER (BLUETOOTH)
- PAIRING A WII U™ PRO CONTROLLER (BLUETOOTH)
- PAIRING THE JOY-CONS™ (BLUETOOTH)
- XBOX® ONE™ ELITE CONTROLLER SERIES 1 PADDLE MAPPING
- STRIKEPACK™ PADDLE/ACTION BUTTON MAPPING
- CONTROLLER HEADSET SUPPORT
- OPTIONAL BUTTON SWAP
- POKÉMON™ MODE OVERVIEW
- POKÉMON™ MODE ACTIVATION
- MENU MODE
- LOAD TIME ADJUSTABLE
- LANGUAGE SELECTION
- ANALOG STICK DEADZONE
- SINGLE RELEASE POKÉMON™
- BOX RELEASE POKÉMON™
- SHINY EGG CHAINING
- EASY CYCLE
- SHINY SOFT RESET CHAINING
- MAX RAID WATT GENERATOR
- RARE DEN FARMING
- AUTO CONFIRM
- AUTO SPIN
- AUTO ROTO LOTO (MASTER BALL FARMING)
- BOX SURPRISE TRADE
- EGG FARMING (ADVANCED SHINY CHAINING)
- BOX EGG HATCHING (ADVANCED SHINY CHAINING)
- APRICORN FARMING
- TIP & TRICKS
- ANIMAL CROSSING™ MODE OVERVIEW
- MACRO RECORDER MODE OVERVIEW
- FORTNITE™ MODE OVERVIEW
- ZELDA™ MODE OVERVIEW
- MARIO™ MODE OVERVIEW
pg. 18/104
PAIRING A SWITCH™ PRO CONTROLLER
(BLUETOOTH)
Switch™ Pro Wireless Controller Pairing - Simply put
your Switch™ Pro Controller into sync mode and press the Bluetooth
Sync button on your Switch Up™ device. Step by step instructions
below:
1. Ensure that your Switch Up™ device is plugged into the Switch™
via the Dock or an OTG cable.
2. Ensure your wireless Switch™ Pro Controller is off.
3. Place your Switch™ Pro Controller into Bluetooth pairing mode by
pressing the SYNC button at the top for a few seconds.
4. The player indicators at the bottom of the Switch™ Pro Controller
will now begin to cycle.
5. Now press the Bluetooth pairing button on the Switch Up™ device.
The LED will flash BLUE to show Bluetooth pairing has begun.
6. Within a few seconds the LED on the Switch Up™ device will be
WHITE indicating that pairing is complete.
7. The player indicators on the Switch™ Pro Controller will light up
one player indicator LED.
8. You are now connected to the Switch Up™ device and ready to use
your Switch™ Pro Controller wirelessly.