User Manual

pg. 21/104
9. Within a few seconds the LED on the Switch Up™ device will be
WHITE indicating that pairing is complete and you will feel a strong
vibration on the RIGHT Joy-Con™ controller.
10. The player indicators on the Joy-Con™ controller will light up one
player indicator LED.
11. You are now connected to the Switch Up™ device and ready to use
your Joy-Con™ controllers.
12. If your Joy-Con™ controller player indicators DO NOT all match the
player indicator on the Switch Up™ device then repeat steps 1 - 11.
NOTE: While the Switch Up™ device supports the Joy-Con™ controllers,
it should be considered a last choice. If you experience analog stick drift,
or issues with interference, responsiveness or lag when using your set of
Joy-Con™ controllers through the Switch Up™, we recommend using one
of the many other supported controllers if you can as they will all provide
a superior experience. Also note that the Switch Lite™’s attached
controls DO NOT count as Joy-Con™ controllers; they cannot make a
wireless connection and hence cannot be connected to the Switch Up™.