User Manual

Table Of Contents
pg. 23/104
STRIKEPACK™ PADDLE/ACTION BUTTON MAPPING
Please update your Switch Up™ firmware to make this BONUS feature
available. You can connect a PlayStation® 4 or Xbox® One™ controller
with an attached STRIKEPACK™ (sold separately), attached via its
included USB cable and wired directly to the Switch Up™. This is a way
of gaining PADDLES/ACTION BUTTONS for your Switch™ games. Make
sure that both the SWITCH UP™ and STRIKEPACK™ are updated to the
latest firmware.
PADDLE/ACTION BUTTON MAPPING is the same as it is on the
STRIKEPACK™. HOLD the corresponding MAPPING BUTTON and press
the desired button on the controller.
Also keep in mind that while the Switch Up™ will pass the STRIKEPACK™
MODS through to the Switch™, this is an unintended side effect;
STRIKEPACK™ MODS are designed for their originally intended console;
they are UNSUPPORTED on Switch™ and may function incorrectly.