Assembly Instructions

ManualsBrandsCollision Awareness Products ManualsAlarms & SignalsCollision Awareness Height Monitor W/1 Set Of PE Beams For 70' Opening, 2 Sensors, 1 Alerting Box

Collision Awareness Toll Free 1.888.324.1920

3550 Legacy Blvd, St Charles, IL www.save-ty.com

Overhead Door Basic Installation Instructions

The Purchase / Safety Manager should explain the features and operation of this safety device to all personnel prior to making it operational.

The use of this or any warning device does not ensure that all drivers or pedestrians will observe or react to a warning signal.

Never take the right-of-way for granted.

It is the responsibility of the operator to proceed safely before entering an intersection, driving in traffic, backing in or out of a tight location, driving

in or around traffic lanes or near pedestrian walkways.

The effectiveness of this device is highly dependent on observation and reaction of the warning provided. It is also important to follow all

manufacturer’s instructions when installing this equipment. The vehicle operator should ensure daily that all features of the device are functional and

that their view is not obstructed in any way.

It is the user’s responsibility to understand the functionality of any warning device and obey all regulations regarding safe operation of a fork truck as

written by OSHA.

Items Included

• Safety device box • Two sensors (one with three prong plug) •Power supply • 2” sensor mount brackets plus hardware

Fit Pkg 1 70’ S

Figure 1

Figure 2

Summary of content (2 pages)

PAGE 1
Overhead Door Basic Installation Instructions The Purchase / Safety Manager should explain the features and operation of this safety device to all personnel prior to making it operational. The use of this or any warning device does not ensure that all drivers or pedestrians will observe or react to a warning signal. Never take the right-of-way for granted.
PAGE 2
Installation Instructions 1. Remove items from box. 2. Mount or hang brackets with sensors on each side of the opening that is being protected. Sensor should be at least 10-15 feet before the opening so there is adequate time to respond to the alerting box (includes selectable audible alert). 3. The Fit Package can e used to protect traffic entering an opening or doorway (Figure 1) or passing by it (Figure 2). 4. Adjust the sensors so that they are at the desired height.