Product Manual

Collomix Rühr- und Mischgeräte GmbH LevMix
85080 Gaimersheim/Germany
Ref. 37.101 (US 110) Rev. 1 Page 8
Working principle
The machine is comprised of a mobile frame with a tiltable mount for a mixing tub.
The upper section holds the drive motor for the mixing apparatus which leads into the
middle of the mixing tub.
The mixing tub is first filled with the required amount of water, followed by 2 - 4 sacks
of powdery material, depending on the fill quantity, with the mixer running.
The material should be ready for use within three minutes. Please observe the infor-
mation issued by the manufacturer of the material.
To pour the material, release the mixing tub and tilt it.
The right fill quantity varies according to the density and viscosity of the material. To
achieve the optimum quality it is recommended that you carry out a test mix first.
Transportation instructions
The machine is delivered ready for use in cardboard packaging on a pallet.
The machine comes with 4 steering rollers to enable it to be moved by a single person
on firm, level ground. It also has a braking roller to stop it moving.
The machine has a weight of 93 lbs. when empty.
The machine must always be properly secured with several transport straps when
transported in order to prevent it from toppling over or rolling away. If it is not secured
it could cause serious injury to persons and damage to property.
Transport the machine in an upright position.