Manualshelf

Item Brochure

ManualsBrandsCollomix ManualsConcrete Mixer PartsHeavy Duty 3-Blade Paddle for Xo 6 Power Mixer
1
Type of mixing tool MK
Collomix Rühr- und Mischgeräte GmbH
Applications:
Ideal for heavy and highly-viscous materials. Particularly suitable for plaster,
mortar, screed, concrete, quartz-filled material, etc.
Collomix Rühr- und Mischgeräte Gmbh • Daimlerstr. 9 • D-85080 Gaimersheim • Tel: ++49 (0) 8458 / 3298-0 • Fax: ++49 (0) 8458 / 3298-30 • Email: info@collomix.de
Technical Data:
Article Art.
No.
Bar-Code
4011024...
Paddle
Ø
(mm)
Length
(mm)
min.
drill chuck
(mm)
Connection Mixing
load (kg)
rec.
r.p.m. (min
-1
)
Drive
(watts)
MK 100 S 41.700-000 417008 100 590 13 5 - 15 400 - 500 700
MK 120 HF 40.114-000 401144 120 590 16 HEXAFIX® 15 - 25 400 - 500 900
MK 140 HF 40.115-000 401151 135 590 16 HEXAFIX® 25 - 40 200 - 300 1000
MK 160 HF 40.116-000 401168 160 590 16 HEXAFIX® 30 - 60 200 - 300 1200
MK 120 M 41.719-000 417190 120 590 M 14 15 - 25 400 - 500 900
MK 140 M 41.749-000 417497 135 590 M 14 25 - 40 200 - 300 1000
MK 160 M 41.759-000 417596 160 590 M 14 30 - 60 200 - 300 1200
The product recommendations given above
are given according to the best of
our knowledge; no guarantee can be
given. Please also refer to the material
manufacturer’s notes and carefully check
the suitability of the tools and machines for
the task in hand, also in accordance with
the information provided in the operating
manuals.
Mixing action: The material is conveyed up to the top of the con-
tainer from the bottom and then flows back down
again at the sides. This is suitable for the proces-
sing of heavy mixtures such as mortar, plaster,
cement, and sand- and pebble-filled materials.
The mixing tool works into the material easily with
a screwing action.
Particular
advantages:
The professional mixing tool – specially developed
for tough service on the building site. With three
mixing blades for fast working with high shear
forces, for thorough mixing results. It requires the
use of a suitably dimensioned drive machine. Fea-
turing particularly high-quality workmanship and
high-grade steel for a long life, even with abrasive
materials.
Material: Every mixing tool is made of steel, unless stated
otherwise, with a powder-coated finish in RAL
5018, turquoise. Type-tested by „TÜV“.

Summary of content (1 pages)