Item Brochure
Type of mixing tool WK
Collomix Rühr- und Mischgeräte GmbH
Applications:
Ideal for all sticky and viscous materials, e.g. cement, plaster, ready-mixed
mortars, etc.
Collomix Rühr- und Mischgeräte Gmbh • Daimlerstr. 9 • D-85080 Gaimersheim • Tel: ++49 (0) 8458 / 3298-0 • Fax: ++49 (0) 8458 / 3298-30 • Email: info@collomix.de
Technical Data:
Article Art.
No.
Bar-Code
4011024...
Paddle
Ø
(mm)
Length
(mm)
min.
drill chuck
(mm)
Connection Mixing
load (kg)
rec.
r.p.m. (min
-1
)
Drive
(watts)
WK 70 S 41.100-000 411006 70 400 10 4 - 7 400 - 500 400
WK 90 S 41.200-000 412003 90 400 10 7 - 10 400 - 500 500
WK 90/500 41.207-000 412072 90 500 10 7 - 10 400 - 500 700
WK 100 S 41.258-000 412584 100 590 13 10 - 15 400 - 500 700
WK 120 S 41.250-000 412508 120 590 13 10 - 15 400 - 500 700
WK 120 HF 40.112-000 401120 120 590 16 HEXAFIX® 10 - 15 400 - 700 900
WK 140 HF 40.113-000 401137 135 590 16 HEXAFIX® 15 - 30 300 - 600 1000
WK 160 HF 40.123-000 401236 160 590 16 HEXAFIX® 30 - 50 300 - 600 1200
WK 120 M 41.269-000 412690 120 590 M 14 10 - 15 400 - 700 900
WK 140 M 41.319-000 413192 135 590 M 14 15 - 30 300 - 600 1000
The product recommendations given above
are given according to the best of
our knowledge; no guarantee can be
given. Please also refer to the material
manufacturer’s notes and carefully check
the suitability of the tools and machines for
the task in hand, also in accordance with
the information provided in the operating
manuals.
Mixing action: The material is conveyed up to the top of the con-
tainer from the bottom and then flows back down
again at the sides. This is suitable for the proces-
sing of heavy mixtures such as mortar, plaster,
cement, and sand- and pebble-filled materials.
The mixing tool works into the material easily with
a screwing action.
Particular
advantages:
Suitable for various applications, the WK mixing
tool is notable for outstanding conveyance of the
material. With two wide mixing helixes for easy
guidance in the material and minimal stress on
the drive machine.
Material: Every mixing tool is made of steel, unless stated
otherwise, with a powder-coated finish in RAL
5018, turquoise. Type-tested by „TÜV“.