Installation Instructions

colonialelegance inc.
colonialelegance inc.
Telephone: [phone]
Toll Free: 800-361-2030
Fax: [phone]
[e-mail]
colonialelegance.com
3800, Du Tricentenaire, Montreal,
Quebec, Canada H1B 5T8
HOW TO INSTALL
BYPASS - BARN DOOR RAIL SYSTEM
Parts Included Recommended Tools
7/32”
1/2” & 5/8”
LAGSCREW
BOLT
BYPASS
BRACKET
(x5)
WASHER
NUT (x5)
SPRING
WASHER (x5)
DO NOT RETURN TO RETAILER
If you have any questions, please contact our customer service at:
[e-mail] or call toll free at: 1-800-361-2030
VISIT OUR WEB SITE
www.colonialelegance.com
*1 year limited warranty
IMPORTANT - PLEASE READ ALL INSTRUCTIONS BEFORE YOU BEGIN INSTALLATION.
• These instructions are for a bypass door installation.
• Identify secure points on the wall to attach the rail before starting your installation.
• It is necessary that all the lag screws used to install the rail are secured to the wall stud (2 x 3 structure).
• Use a wood plank secured to the wall stud if you are unable to fix all lag screws in wall stud.
(x15)
(x10)
(x5)
Drill 7/32” pilot holes at each mark.
3
5
1 1/2"
7 15/16"
Fix the 5 bypass brackets at their location.
Using a lagscrew and a washer for each holes.
2
1 1/2"
7 15/16
”
Mark the location of each bracket 7 15/16” over the center of each
pilot holes for the rail that is install directly to the wall.
6
Insert the bolt with a washer through the rail, spacer and bypass bracket.
Tight everything with a nut and a spring washer.
Repeat for all hole locations.
Continue the installation
of your rail to the wall.
Once you are done go to step 5.
4
7
5
3
Finish your rail installation going
back to step 2.1 of your single barn
door rail system.
1
Start by following the steps of a single barn door rail
system installation up to step 1.3.
When you have complete step 1.3 comeback to step 2
of this bypass installation instruction.