User guide

20
SEARCH
Press to go to SEARCH menu in live display mode.
Press to move left or to change the values in Setup mode.
It is also used as the number 4 when entering password.
Press to move up the menu in Setup mode.
It is also used as the number 1 when entering password.
Press to move right or to change the values in Setup mode.
It is also used as the number 2 when entering password.
Press to move down the menu in Setup mode.
It is also used as the number 3 when entering password.
Press to select desired menu item or to store the setup value.
ESC
Press for temporary storage of the changed value or to return to the previous menu
screen.
USB Port
To archive still-image or video into a USB memory or upgrade firmware with USB
memory stick, connect a USB memory to the USB terminal on the front panel.
3-2. Rear Panel
Figure 3.2.1. Rear Panel
Table 3.2.1. Rear panel connections
NO
Connection
Purpose
1
VIDEO IN
8 BNC connectors for video input. (NTSC/PAL 1~8ch)
2
LOOP
8 BNC connectors for video output. (Loop Back)
3
SPOT
4 composite video outputs for spot monitoring.
4
AUDIO IN
8 connectors for audio input. (1~10ch)
AUDIO OUT
1 connector for audio output.
5
VIDEO IN
2 HD-SDI connectors for video input. (9~10ch)