User guide

23
4-2. Setup – DISPLAY
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change
the value of the menu item. To return to the previous setup menu screen, press the ESC button.
Figure 4.2.1. Display Mode Setup Screen
Table 4.2.1. Menu Items in DISPLAY Mode Setup
Item
Description
OSD
Enable/disable on-screen-display.
- Select ON: Show it on the screen,
- Select OFF: Disappear on the screen.
OSD CONTRAST
Set the visibility level of the On Screen Display (OSD).(0-100)
SEQUENCE
Enable/disable sequential display of video in Single, Quad, and 10 splits mode.
SEQ-DWELL TIME
Set the dwell time of each, single channel display in sequential display mode
(3~60seconds)
CHANNEL
Select a channel for applying the following settings using the control button to
change the channel.
NAME
Set the channel name.