User guide

39
ADMIN, NETOWRK, USER1, USER2, USER3:
Selected Checkbox: The user can access to the function.
Blank Checkbox: The user can not access to the function.
USER
PASSWORD
Options are ADMIN, NETWORK, USER1, USER2 and USER3.
Select USER PASSWORD using the mouse or the control button on the remote
control and press SEL button. Select user type and enter the current password. And,
enter a new password, enter the same password again to confirm and select OK.
Then the message “PASSWORD CHANGED” is displayed.
The factory default password is 1111.
It is highly recommended to assign a new password to protect the system.
AUTHORITY OF
PLAYBACK
Select the Checkbox The DVR will ask for a password when the admin/user access
to playback mode.