User guide

75
8-7-5. System
Select System to set system and time settings.
DVR ID: Sets individual designation to DVRs.
Date Format: Select the date display format
YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD,MM-DD-YYYY, DD-MM-YYYY
NTP: Sets whether to synchronize the time using NTP server or not.
Primary SNTP Server: Input the NTP primary server address.
Secondary SNTP Server: Input the NTP secondary server address.
Time Zone: Select the time zone.
Connection Mode: Select the connection mode to NTP time server.
Connection Period: Set the connection period.
Send E-Mail: Sets whether to enable/disable e-mail sending function.
TRANSMISSION MODE: Sending an image only of the channel when an alarm event is triggered.
IP NOTIFICATION: Enable/disable sending e-mail when the IP address of your DVR is changed.
EVENT ALARM: Enable/disable sending e-mail reports when an alarm event is triggered.
S.M.S.R.T.: Enable/disable sending e-mail reports when S.M.A.R.T. is triggered.
Mail Server: Input the SMTP server name as well as the user ID and password.
Mail From (Return Mail Address): Set the source e-mail address to be notified to the destination.