User`s guide

21
DVR sends E-MAIL Notification when the NTP server time is faster than the system
time with bellow message.
“NTP server time is faster than the system time.
In this case, NTP server time is ignored to protect the user data.
User must set the time manually.
SYSTEM TIME: Mon Oct 10 13:46:49 2011
SERVER TIME: Mon Oct 10 13:33:12 2011
DVR ID: DVR
IP ADDRESS: 172.16.2.46”
SEND EMAIL
TRANSMISSION MODE: Select the mail transmission mode (TEXT or VIDEO).
- On VIDEO mode, AVI video file is attached when the motion is detected.
- The AVI file contains the 1~2 second(s) pre-record and 1 second post record.
IP NOTIFICATION: Enable/disable sending e-mail when the IP address is changed.
MAIL BY SENSOR: Enable/disable sending e-mail when the sensor is detected.
MAIL BY MOTION: Enable/disable sending e-mail when the motion is detected.
MAIL BY SENSOR: Enable/disable sending e-mail when sensor input is received.
MAIL BY VIDEO LOSS: Enable/disable sending e-mail when the video loss is detected.
MAIL BY S.M.A.R.T.: Enable/disable sending e-mail when S.M.A.R.T. is triggered.
MAIL BY STATUS: Enable/disable sending periodical e-mail of the system status.