User`s guide

4-4. Setup – DEVICE Mode

In the SETUP menu, select the DEVICE tab. Then, the device menu is displayed as pictured below.

Navigate through the menu items or change the settings using the mouse or the remote control.

Figure 4.4. DEVICE Setup Screen

Table 4.4. Menu Items in DEVICE Setup Screen

Item

Description

ALARM OUT

Set the sensor, motion, and video loss for triggering alarm relay

HDD Error and Video Loss can trigger beeping.

DIGITAL DETERRENT

Setup schedule and audio recordings for Digital Deterrent.

CONTROLLER & PTZ

Set the PTZ baud rate, protocol, and ID.

SPOT-OUT

Display the channels triggered by an event (Refer to 4.4.4)

SITE

Select specified channel for motion zone setup.

MOTION ZONE

Select either Full Zone or Partial Zone for motion detection.

MOTION SENSITIVITY

Set the motion sensitivity for the selected channel.

Control the motion sensitivity from 1 to 9.

(9 – Highest sensitivity, 1 – Lowest sensitivity)

KEY TONE

Enable/disable key tone from front panel usage.

REMOTE CONTROL ID

Set the remote control ID.

1. Select ID.

2. Input the remote control ID number.

3. An icon will indicate on the Live Screen if the remote control ID is

synchronized.

The options are from 0 to 99