SDS

4 - FIRST AID MEASURES
Eyes: Flush eyes with fresh water for at least 15 minutes.
Skin: Wash thoroughly with soap and water.
Ingestion: Have victim drink enough fresh water to ensure dilution.
Inhalation: Move victim to fresh air.
Notes to first aid providers: Call for emergency medical care if symptoms persist.
5 - FIRE FIGHTING MEASURES
Flammable limits in air (% by volume): Upper: Not applicable. Lower: Not applicable.
Flash point: Not applicable.
Autoignition temperature: Not applicable.
HMIS hazard classification: Health: 1 Flammability: 0 Reactivity: 0 Protection: E
Extinguishing media: Foam, alcohol foam, CO
2
, dry chemical, water fog.
Special fire fighting procedures: Use self-contained breathing apparatus in confined spaces. Observe recommended procedures for handling
ordinary combustible materials.
Unusual fire and explosion hazards: Liquid material is non-combustible, but dried films are capable of supporting combustion when in contact with
open flames. Closed containers can develop internal pressure and may rupture when subjected to extreme heat.
Hazardous decomposition products: Combustion can produce carbon monoxide and/or carbon dioxide.
6 - ACCIDENTAL RELEASE MEASURES
Dike and absorb spilled liquid with inert material such as clay granules, sand, earth, or sawdust. Use rags to clean up small amounts of liquid spilled.
7 – HANDLING AND STORAGE
Handling and storage: Keep containers closed when not in use. Do not handle or store near heat, flame, or strong oxidizers, acids and alkalis.
Store in cool, well-ventilated area rotate stock, use older material first. DO NOT FREEZE.
Other precautions: Inspect all containers for leaks periodically.
3 - COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Ingredients:
NO REPORTABLE HAZARDOUS INGREDIENTS.
NOTE: Potential unusual allergic sensitivity to trace ingredients of this product can be minimized by following recommended procedures for safe handling, storage, disposal, and use.
8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering controls: Use signs or barriers to restrict access to painting work area.
Ventilation: Normal air circulation should be sufficient. Otherwise, use portable fans.
Respiratory protection: For spray application, use particulate filter mask to avoid breathing spray mist. Exposed persons with unusual allergic
sensitivity may need organic vapor respirator (NIOSH/MSHA TC 23C or equivalent).
Eye protection: Use safety glasses, goggles, or face shield to protect eyes.
Skin protection: Use waterproof gloves (latex, vinyl, rubber, or neoprene) to avoid skin contact.
Other protective clothing or equipment: Waterproof head covering and general protective clothing are recommended for protection as
necessary.
Work hygienic practices: Wash hands and face before eating or drinking.