SDS

Safety Data Sheet
Page 3 of 8
COLORSHOT Premium Spray Paint-Gloss, Satin, Matte S-19-0005
air and may travel along the ground to a distant ignition source and flash back.
Hazardous combustion
Products:
Products of combustion may include, and are not limited to: oxides of carbon.
6. ACCIDENTAL RELEASE MEASURES
General measures:
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Isolate from fire, if possible, without unnecessary risk. Remove ignition sources. Use
special care to avoid static electric charges.
Emergency Containment
procedures:
Stop leak if safe to do so. Contain and/or absorb spill with inert material (e.g. sand,
vermiculite), then place in a suitable container. Do not flush to sewer or allow to enter
waterways. Use appropriate Personal Protective Equipment (PPE).
Environmental Precautions,
if any:
No additional information available.
Methods for Cleaning Up:
Scoop up material and place in a disposal container. Provide ventilation.
Personal Protective
Equipment:
Use personal protection recommend in Section 8.
7. HANDLING AND STORAGE
Safe Storage:
Store in a well-ventilated place. Keep out of the reach of children. Keep container
tightly closed. Do not expose to temperatures exceeding 50°C/ 122°F. Keep in
fireproof place. Store away from direct sunlight or other heat sources.
Safe Handling:
Keep away from sources of ignition – No smoking. Avoid contact with skin and eyes.
Avoid breathing dust/fume/gas/mist/vapors/spray. Do not swallow. Handle and open
container with care. When using do not eat, drink or smoke. Do not spray on an open
flame or other ignition source.
Additional hazards when
processed / Technical
measures:
Hazardous waste due to potential risk of explosion. Pressurized container. Do not
pierce or burn, even after use.
Proper grounding procedures to avoid static electricity should be followed.
8. EXPOSURE CONTROL AND PERSONAL PROTECTION
Occupational Exposure Limits:
Chemical name
ACGIH TLV
US IDLH
OSHA PEL
NIOSH REL
n-Butyl acetate
TWA 50 ppm,
STEL 150 ppm
1700 ppm (10%
LEL)
TWA 710 mg/m
3
,
150 ppm
TWA 710 mg/m
3
, 150 ppm,
STEL 950 mg/m
3
, 200 ppm
Ethyl acetate
TWA 400 ppm
2000 ppm (10%
LEL)
TWA 1400 mg/m
3
,
400 ppm
TWA 1400 mg/m
3
, 400 ppm
Acetone
TWA 250 ppm, STEL 500
ppm
2500 ppm (10%
LEL)
TWA 2400 mg/m
3,
,
1000 ppm
TWA 590 mg/m
3
, 250 pppm
Cyclohexanone
TWA 20 ppm, STEL 50
ppm
700 ppm
TWA 200 mg/m
3
,
50 ppm
TWA 100 mg/m
3
, 25 ppm;
Chemical category: Potential for
dermal absorption.
2-Butoxyethanol
TWA 20 ppm
700 ppm
TWA 240 mg/m
3
,
50 ppm; Limit value
category: Prevent
or reduce skin
absorption.
TWA 24 mg/m
3
, 5 ppm;
Chemical category: Potential for
dermal absorption.
Carbon black
TWA 3 mg/m
3
(inhalable
particulate matter)
1750 mg/m
3
TWA 3.5 mg/m
3
3.5 mg/m
3
, 0.1 mg/m
3
(Carbon
black in prsence of Polycyclic
aromatic hydrocarbons)
Titanium dioxide
TWA 10 mg/m
3
5000 mg/m
3
15 mg/m
3
(total
dust)
-