Use and Care Manual

COLORSHOT
®
PREMIUM
Spray Paint
USE & CARE MANUAL
USE ON indoor & outdoor projects, including wood, metal, most
plastics, and crafts. Does not work on PP plastic. Test first in a
hidden area.
PAINTING CONDITIONS Use outdoors or in a well-ventilated area.
Avoid spraying in windy or dusty conditions. Use when temperature is
between 50°F (10°C) and 90° F (32°C) & humidity does not exceed
70% to ensure proper drying. Do not apply to surfaces that, when
heated, exceed 200°F (93°C).
PREPARATION Cover surrounding areas to protect from overspray.
You'll regret it if you don't.
• Remove loose paint, rust, dirt, and grease from surface to be painted.
• Lightly sand shiny surfaces.
• Clean, rinse, and let dry completely.
WARNING! If you scrape, sand, or remove old paint, you may release
lead dust. LEAD IS TOXIC. Contact the National Lead Information
Hotline at 1-800-424-LEAD, or log on to www.epa.gov/lead.
PRIMING Use COLORSHOT® Primer for maximum adhesion &
color vibrancy.
PAINTING Shake can vigorously for 1 minute after mixing ball begins
to rattle. Seriously, one minute. This paint is highly pigmented and
performs best when fully mixed. Shake often during use. Hold can
upright 6"-10" from surface and spray in smooth, even strokes. Apply
one light coat at a time, waiting a few minutes between coats.
DRY & RECOAT Recoat within 1 hour or after 24 hours. Dries to the
touch in 10 minutes. Fully cured in 24 hours.
CLOGGING If valve clogs, pull o spray top and rinse with a solvent
such as mineral spirits. Do not stick a pin or other object into opening.
CLEAN-UP Turn can upside down after use and spray for 5 seconds or
until no spray comes out to clear valve and prevent clogging. Wipe o
tip before storing.