SDS

Safety Data Sheet
Page 3 of 7
COLORSHOT Premium Spray Paint - Metallic S-19-0006
General measures:
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Isolate from fire, if possible, without unnecessary risk. Remove ignition sources. Use
special care to avoid static electric charges.
Emergency Containment
procedures:
Stop leak if safe to do so. Contain and/or absorb spill with inert material (e.g. sand,
vermiculite), then place in a suitable container. Do not flush to sewer or allow to enter
waterways. Use appropriate Personal Protective Equipment (PPE).
Environmental Precautions,
if any:
No additional information available.
Methods for Cleaning Up:
Scoop up material and place in a disposal container. Provide ventilation.
Personal Protective
Equipment:
Use personal protection recommend in Section 8.
7. HANDLING AND STORAGE
Safe Storage:
Store in a well-ventilated place. Keep out of the reach of children. Keep container
tightly closed. Do not expose to temperatures exceeding 50°C/ 122°F. Keep in
fireproof place. Store away from direct sunlight or other heat sources.
Safe Handling:
Keep away from sources of ignition – No smoking. Avoid contact with skin and eyes.
Avoid breathing dust/fume/gas/mist/vapors/spray. Do not swallow. Handle and open
container with care. When using do not eat, drink or smoke. Do not spray on an open
flame or other ignition source.
Additional hazards when
processed / Technical
measures:
Hazardous waste due to potential risk of explosion. Pressurized container. Do not
pierce or burn, even after use.
Proper grounding procedures to avoid static electricity should be followed.
8. EXPOSURE CONTROL AND PERSONAL PROTECTION
Occupational Exposure Limits:
Chemical name
ACGIH TLV
US IDLH
OSHA PEL
NIOSH REL
n-Butyl acetate
TWA 50 ppm,
STEL 150 ppm
1700 ppm (10%
LEL)
TWA 710 mg/m
3
,
150 ppm
TWA 710 mg/m
3
, 150 ppm,
STEL 950 mg/m
3
, 200 ppm
Ethyl acetate
TWA 400 ppm
2000 ppm (10%
LEL)
TWA 1400 mg/m
3
,
400 ppm
TWA 1400 mg/m
3
, 400 ppm
Aluminim
TWA 1 mg/m
3
(respirable
particulate matter)
-
15 mg/m
3
(total
dust), 5 mg/m
3
(respirable dust)
10 mg/m
3
(total dust), 5 mg/m
3
(respirable dust)
Carbon black
TWA 3 mg/m
3
(inhalable
particulate matter)
1750 mg/m
3
TWA 3.5 mg/m
3
3.5 mg/m
3
, 0.1 mg/m
3
(Carbon
black in prsence of Polycyclic
aromatic hydrocarbons)
Titanium dioxide
TWA 10 mg/m
3
5000 mg/m
3
15 mg/m
3
(total
dust)
-
Mica
3 mg/m
3
(respirable
particulate matter)
1500 mg/m
3
(containing 1%
quartz)
-
3 mg/m
3
(containing <1%
Quartz-respirable dust)
Appropriate Engineering Controls: Individual Protection measures, such as PPE (Personal Protective
Equipment): Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below
recommended exposure limits.
Personal Protection Equipment:
Respiratory Protection:
In case of insufficient ventilation, wear suitable respiratory equipment. Respirator
section must be based on known or anticipated exposure levels, the hazards of the
product and the safe working limits of the selected respirator.
Eye Protection:
Safety glasses or goggles are recommended when using the product.