SDS

Page 1 of 4
PureBond
®
Material Data Safety Sheet
Domestic Veneer Core Constructions
Revised: August 21, 2013 Supersedes: February 9, 2011 Number of pages: 4
PART I: PRODUCT IDENTIFICATION
Product: Decorative hardwood plywood assembled with domestic veneer core in assemblies
laminated with Columbia’s proprietary, formaldehyde-free, soy-based PureBond assembly
process.
Domestic aspen/poplar veneer core lamination blanks and bending plywood without
decorative hardwood face and back veneers laminated with Columbia’s proprietary,
formaldehyde-free, soy-based PureBond assembly process. Decorative rotary veneer also
covered by this document.
Synonyms: NAF (No-added formaldehyde) or NAUF (No-added urea formaldehyde) decorative
hardwood plywood
Trade Names: PureBond brand name can be used together with these additional, proprietary Columbia
sub brand designations: JayCore®, KayCore, CANAM Gold/silver, DesignEdge,
DesignEdge+, MPX®, UV Wood (on PureBond panels), firststep®, LabCoat® (on
PureBond panels.)
Manufacturer: Columbia Forest Products
7900 Triad Center Drive, Suite 200
Greensboro, NC 27409
www.columbiaforestproducts.com
Contact: Ang Schramm, Technical Services Manager
Emergency phone: [phone]
PART II: HAZARDOUS INGREDIENTS
Component: Wood dust
2
(Generated as waste by-product of further fabrication by user)
CA Prop 65 Notice: Drilling, sawing, sanding or machining wood products generates wood dust, a substance
known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust
mask or other safeguards for personal protection. California Health and Safety Code
Section 25249.6.
CAS No.: None
Exposure limits: ACGIH TLV Softwoods and most hardwoods PEL STEL
(except Beech, and Oak) 5 mg/m
3
TWA 10 mg/m
3
ACGIH TLV Certain Hardwoods (15 min)
(i.e. Beech and Oak) 1 mg /m
3
TWA N/A
OSHA All soft and hard woods
(except Western Red Cedar) 5 mg/m
3
TWA 10 mg/m
3
OSHA Western Red Cedar 2.5 mg/m
3
TWA N/A