Specifications

7
in.k450 installation
6
9/16
"
Installation in.k450 with adhesive
The keypad should be installed directly onto the spa (or very
close to it) so that it is easily accessible to the user.
• Using the drilling template supplied with the unit, determine the
mounting location and then stick the template on the location.
• Drill two
3/8” (9 mm) diameter holes at 6 7/32” (158 mm) from
center to center, in the exact position according to the drilling
template.
• Cut out and remove the material between the two holes
following the profile with a jig saw (see illustration).
• Clean the installation surface and peel the adhesive gasket from
the back of the keypad.
• Insert keypad and align it correctly, then secure it properly in
place by using the two wing nuts provided.
∅ 3/8"
Gasket with adhesive
6
7/32
"
158 mm
Follow profile with jig saw
Drill 2x
3/8”
2x 9 mm
2
5/16"
59 mm
2
5/16
"
Wing nuts