User's Manual

6) Specification sheet
¡  Transmitter LIMIT UNIT
* Carrier power 2.0W max. W
* Frequency Tolerance +/- 1.2KHz KHz
* Maximum deviation +/- 2.5KHz KHz
* Audio distortion 5% max. %
* Hum & Noise 40dB min. dB
* TX current 1000mA max. mA
* Adjacent channel power 60dBc dBc
* Spurious emission(TX on) 60dBc dB
¡  Receiver
* Useable sensitivity -119dBm min.
* 20dB N/Q sensitivity -115dBm min.
* Squelch sens. Threshold -128dBm min.
Tight -118dBm max.
Non
* Modulation acceptence 7.5KHz min. KHz
* Maximum audio out-put power 100mW min. mW
* Hum & Noise 40dB min. dB
* Audio distortion 5% max. %
* Stand-by current w/o saving 40mA max. mA
w/ saving (1:4) 20mA max. mA
* Co-channel rejection -12dB dB
* Adjacent channel selectivity 50dB min. dB
* Spurious response attenuation 40dB min. dB
* Intermodulation distortion 50dB min. dB
* RX blocking NA
* Spurious emission(1M - 1GHz) -57dBm max. dBm
(1G - 12GHz) -47dBm max. dBm
Operating Time calculations 5 : 5 : 90
* Battery type AA * 4 ALKA
* Battery Capacity 2600 mAH
* TX Current 1000 mA
* Stand-by current 40 mA
* RX Current 120 mA
* Operating Times 36.2 Hours
* TX Talking Times 3.3 Hours
* TX Power 2000 mW
* Battery Voltage 6 V
* TX Efficiency 28 %