User manual

30 Capricorn 2000EX Weather Station
___________________________________________________________________
Columbia Weather Systems, Inc.
Installation Overview
Unpacking the Unit
Installing the Control Module
Installing the Barometric Pressure Sensor
Installing the Temperature Sensors
Temperature Sensor Initialization
Installing optional Self-Aspirating Radiation Shield
Installing the Optional Humidity Sensor
Installing Wind Sensor
Installing the Optional Rain Gauge Sensor
Installing the Optional Leaf Wetness Sensor
Installing the Optional Solar Radiation Sensor
Tools Needed
7/64 Allen wrench (provided with wind sensor)
7/32 Allen wrench (provided with wind sensor)
#3 (med.) Phillips Screwdriver
#2 (small) Phillips Screwdriver
Small straight blade (1/8") Screwdriver
Power Drill and 3/8" or 1/2" Bit
(1/2" bit needed to thread temperature and wind sensor cables through
same hole.)
3/8" or Adjustable Wrench
Wire Cutter
Compass
Pencil
Materials Needed
(See also Section 4: Optional Sensor Mounting Hardware.)
Black PVC Electrical Tape
(2-4) Plastic Wall Bushings