User manual

Capricorn 2000EX Weather Station 37
___________________________________________________________________
Columbia Weather Systems, Inc.
1. Install Vane
A. Fully insert vane arm into hub
B. Align vane with center axis of sensor
C. Using 7/64” Allen wrench, tighten set screw thru top of hub
2. Sensor Installation
A. Install alignment adapter onto sensor base with socket head cap
screw
B. Place sensor with adapter on tip of mast
C. Rotate entire sensor until vane tail points to “true North”
D. Tighten both set screws clamping adapter to mast, using 7/32
Allen wrench
E. Remove shoulder screw from hub and save
Connect sensor cable