User manual

62 Capricorn 2000EX Weather Station

___________________________________________________________________

Columbia Weather Systems, Inc.

Continuous display of direction

NORTH: This command continuously displays the wind direction. This

command is used for locating the north direction on the wind sensor. An

<Esc> followed by a carriage return terminates this command.

Continuous display of weather

information

1 XFER: This command continuously displays a Sample record every 15

seconds and wind speed and direction every one second. The wind

speed and direction record starts with the letter W followed by three

digits for wind speed in MPH followed by two digits for wind direction.

Example:

W00124

S,02/11/07,17:44,24WD,001WS,00.08R,085RH,29.82P1,+048.56T1,+070.85T2,+067.24T3,+065.0

8T4,01.74LW,0.00X1,0.00X2,6014

W00224

W00124

W00120okok

An <Esc> followed by a carriage return terminates this command.

XSET: This command defines the frequency the Sample record is

displayed in the XFER output. The default frequency of the Sample

record in the XFER output is 15 seconds. This frequency can be

changed using the XSET command. For example, 60 XSET will cause

the Sample record to be issued every 60 seconds. XSET will change the

frequency of the XFER output on both serial ports.

CONT: This command will continuously output the Sample record at a

specified interval. For example, 5 CONT will output a Sample record

every 5 seconds. The time interval is limited to a range of 1 to 16

seconds.

S,05/01/99,09:44,40WD,000WS,00.00R,022RH,29.10P1,+070.70T1,+255.00T2,04.80LW,5.00X1,0

.10X2,4923

S,05/01/99,09:44,40WD,000WS,00.00R,023RH,29.09P1,+070.70T1,+255.00T2,04.80LW,5.00X1,0

.10X2,4932