User`s guide

Virtual Weather Station User's Guide
-15- 04/10/07
continue running Virtual Weather Station.
6.6.7.4 Link OK
After communication with the WMR-100 weather station is
detected, the Link OK light will display Red or Green. If
the LED is green, it indicates the console is communicating
properly with the remote sensor. If the LED is red, the
console has lost communication with the remote sensor.
6.6.7.5 Data OK
1. If the data is OK, OK will be displayed.
2. If the data is out of range high (open circuit), HH
will be displayed and the sensor must be
replaced.
3. If the data is out of range low (short circuit), LL
will be displayed and the sensor must be
replaced.
6.6.7.6 AC OK
If the AC adaptor is plugged into the console, the AC
adaptor LED will display green. If the AC adaptor is
faulty or the AC adaptor is not plugged in to the console,
the AC adaptor LED will display red.
6.6.7.7 RF Clock
The RF clock, or radio controlled frequency clock
automatically synchronizes to the atomic clock in Fort
Collins, CO. For more information on how this works,
visit:
http://www.ambientweather.com/whisatcl.html
6.6.7.7.1 RF On
This indicates the RF clock has been turned on by the user
(the RF clock can be overridden and the time adjusted
manually). The LED will turn green if selected by the user.
6.6.7.7.2 RF OK
The LED will turn green if the RF Clock is functioning
properly.
6.6.8 Stationless Operation
You do not even have to own a weather station to collect
and display weather data, or you can view information from
another computer collected on the network.
Reference Figure 8 – Stationless Mode Configuration. To
operate in the Stationless mode, select the Stationless
Weather Station option, and then the Stationless Settings
button.
In the Stationless mode, the input is based on a comma
separated file (csv) data generated by Virtual Weather
Station running on a different computer across the network,
from data downloaded from a METAR weather site, or data
input from a third party program.
The format of the comma separated file data is described in
Section 7.2.