User`s guide

Virtual Weather Station User's Guide
-48- 04/10/07
6.30.5.3 Cancel Download Data
Cancels the current download
6.30.5.4 Last Download Record
Provides a marker for the last record downloaded from
archive memory. The next time Virtual Weather Station is
launched, the next record will be downloaded.
6.30.6 Reset
6.30.6.1 Reset Total Rain
Resets the total rain stored in the WeatherHawk memory.
6.30.6.2 Clear All Memory
Clears all of the memory and settings in the WeatherHawk
firmware.
Figure 33 – WeatherHawk Settings
6.31 LaCrosse WS2300, Lacrosse WS2308,
Lacrosse WS2310, LaCrosse 2315, La
Crosse 3600 and La Crosse 3610 Settings
Menu Shortcut: Settings X La Crosse Technology
Settings
The La Crosse Technology computer interface does not
pass both the corrected (relative or sea-level) pressure, and
the measured (absolute) pressure, so the difference in these
pressures must be entered each time the corrected pressure
is modified in the console.
To determine these values: select the barometer display on
your weather station monitor and toggle between REF and
ABS and enter the values into Virtual Weather Station.
Figure 34 – La Crosse Technology Weather Station
Settings
6.32 Other Display Features
6.32.1 Minimizing the Program and Display
When the display is minimized, the title bar displays the
outdoor temperature, humidity, wind direction and
windspeed on the taskbar.
Figure 35 – Minimized Taskbar Display
6.32.2 Hiding Virtual Weather Station
To hide Virtual Weather Station, double click on the
Taskbar icon. To display after hiding, double click on the
taskbar.
Figure 36 – Virtual Weather Station Taskbar Icon
6.33 WeatherLink Automation (Davis
Instruments only)
Menu Shortcut: Settings X WeatherLink / PCLink
Automation
You can automatically download data to the WeatherLink
program using Virtual Weather Station. This assures that
data is stored in both programs for users that wish to