Alr Purifier EPEE-1886 Instruction Manual “Thank you for choosing our product.
READ AND SAVE THESE INSTRUCTIONS 1. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS AIR PURIFIER WITH ANY SOLID-STATE SPEED CONTROL DEVICE. 2. WARNING UNPLUG OR DISCONNECT THIS AIR PURIFIER FROM THE POWER SUPPLY BEFORE SERVICING. 3. WARNING THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN OTHER). TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG.
ee Product Ar Purifier Modal No. E Pi-186 Input voltage 120v~f 80Hz Rated power BOW Noise level S5dB(A} Met/Gross weight 3.6814 .76Ky CARD 130m3/h Suitable room size: 16 Product size EE Removal of PE bag Before first time use, please open the front panel, take out the filters and remove its PE bag wrap or the unit will not be able te purify the alr.
Operation guide LED color to Indicate alr quality level The product will automatically detect the indoor air quality The following table describes PM2.5 air quality level. Praia quality level value{ughn®} LED color Good 1-75 Green Average 76-150 Yellow Poor >180 Red Clean / replace filters Please follow the pictures on the filter below to correctly install the filter: As shown in diagram A below: hold both upper sides of the unit, pull out the front panel and Itt It.