Air Purifier Instruction Manual Thank you for choosing our product.
1. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS AIR PURIFIER WITH ANY SOLID-STATE SPEED CONTROL DEVICE. 2. WARNING UNPLUG OR DISCONNECT THIS AIR PURIFIER FROM THE POWER SUPPLY BEFORE SERVICING. 3. WARNING THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN OTHER). TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG.
ee Product Name Ar Purifier Mods! No. E Pi-560 Input voltage 120V~ /80HZ Ra tad power Sow Noise level 55dB{A} Net/Gross weight BB/105kgs CARD S00m3h Product size 300°300°805mm EE Removal of PE bag Before first time use, please open the filter door at the back, take out the fitter and remove Ite PE bag wrap or the unit will not be able to purify the alr. Operation guide © power button Press the “Power” button to turn on/off the unit Fan speed Press Speed button to set fan speed atA 1238 A= AUTO mode.
Operation guide The product has screen to show PM2.5 and LED color to indicate air quality level The product will automatically detect the indoor air quality The following table describes PM2.5 air quality level. Air quality level P25 LED color Good 1-30 Bue Average 31-80 Goren Poor 81-150 Orange Critical >151 Red Clean / replace filters Please follow the pictures below fo correctly Install the filter: As shown in diagram A below: pane the filter door.
Lig Install APP Download Smart Life APP from APP Store(iOS) or Play Transistorized) Or scan QR code below to download the APP. 2. Register If you don't have Smart Life account, register with a verification code sent by SMS. To register: A. Tap to enter registration page B. The system automatically recognizes your country/area. You can also select your country code manually. Enter your mobile phone number or email address and tap “Next” C.
G. After successfully configuring the devices, the device will be shown on the ahem page. Tap to enter its control page. Note: 1. When the device is online, it can be controlled 2. When devices Is offline, It displays “Offline” and can not be remotely powered on. -Si BOE. He WERE ‘ri share Bsa: -tsetse up Amazon Echo and enable Smart Life Skill User can configure Echo through web or Alexei app.
D. Tap the hamburger menu on the top left comer, select "Settings”, then tap "SET UP A NEW DEVICE". Cid Named Satin WIFI. dh Cn a sts F. Long press the dot button on the top of your Echo device until the orange light shows up, then tap "CONTINUE". When your phone is connected to Echo, tap "CONTINUE". Son QR dee Select a WI-Fi to let Echo have the access to the interment. Type in the WI-Fi password, then tap "CONNECT". Echo may take several minutes to connect the network.
H. Tap "CONTINUE" when Echo is connected to the network. After an introduction video, tap "CONTINUE" to finish the setup. 2. Link Smart Life account to Alexei A. Tap "Skills" in the hamburger menu, then search "Smart Life". Select "Smart Life" and tap "ENABLE" to enable the Skill “14B. You will be redirected to the account link page. Type in your Smart Life account and password, don't forget to select the country/region where your account belongs to. Then tap "Link Now” to link your Smart Life account.
Se Note: every time you change the device's name on Smart Life app, Echo must re-discover before you control them. 2. Control devices by voice commands Now you can control your smart devices through Echo. You can use the following commands to control your devices: > Alexei, tum on/off air purifier. > Alexei, set alr purifier to 1. Will tum to Speed 1 > Alexei, tum air purifier to 2. Will turn to Speed 2 -note: You will need to have set up a Google Home account prior to linking your air purifier. 1.