Operation Manual

18
DAILY MAINTENANCE
3. REPLACING THE SQUEEGEE RUBBERS
Verify that the state of wear and tear of the squeegee rubbers and, if necessary, replace them. To
replace them you must:
1. Raise the squeegee
2. Remove the two knobs
3. disassemble the squeegee from its support
4. Remove the tube from the squeegee nozzle so the squeegee can be removed
WARNING: Before carrying out any type of maintenance,
disconnect the machine's battery connector.
WARNING: this operation must be carried out by using gloves in
order to protect against contact with dangerous solutions
5. unscrew the knobs on the squeegee that block the rubber-pressing blades, and remove them
6. remove the rubber-pressing blades
7. replace the rubbers
8. reassemble everything, carrying out the above-mentioned operations in the reverse order
WARNING: Before carrying out any type of maintenance,
disconnect the machine's battery connector.
WARNING: this operation must be carried out by using gloves in
order to protect against contact with dangerous solutions
Downloaded from www.Manualslib.com manuals search engine