Manual

7
5. SWITCHING ON AND OFF
Display Test/Mode
The‘ON/OFF’buttononthekeypadisusedtoswitchonthe
thermometer.Afterashortpausethedisplaywillshowthe
currentmodeloftheinstrumentandwillthenreverttonormal
temperaturedisplay.Thecurrenttimeisalsopermanently
displayedontheLCD.
6. DATA HOLD
TheN9005andN9094thermometershaveadataholdfacility.If
the‘II’buttonispressedatanytimeduringnormaltemperature
mode,thecurrenttemperaturewillbeheldonthedisplay.To
releasepress‘II’.
7. COUNTDOWN TIMER
TheN9005andN9094thermometershaveacountdowntimer.
ThisfunctionisactivatedfromtheSetUpMenu–seesection
below,andcanbecalibratedinseconds/minutesorhours.
Pressingthecountdowntimerbuttonwillstartthisfunction.
Pressingthebuttonagainduringthecountdownperiodwillstop
thecount.Theinstrumentwillbeepfor30secondsattheend
ofacountdownperiodtoindicatetotheuserthatithasbeen
completed.
8. AUTO SWITCH OFF/POWER SAVING MODE
TheN9005andN9094thermometershaveaselectableauto-
switchofffeature.Thisissetto3minutesfromthefactory.
PleaserefertoSetUpMenuforinstructionsonchangingthis
setting.