User's Manual

- 9 -
An export function allows for the migration of the data to a CSV (Comma separated Excel compatible
file).
The number of channels displayed on the graph can be altered.
The calendar function allows the user to select data from another day, providing the data exists for the
current task.
Various functions on the graph allow for the user to zoom in or out.
At the top of the screen are displayed the current properties for the page. Here it is possible to
view/edit the current properties for the transmitter by clicking on the serial number. Also there are
links to change the selection for Task and Period (if applicable).
By clicking on Task, a new Window opens up allowing the viewing or access to the setup of the Task.
From this screen it is also possible to start and stop the transmitters to create new periods.
The default view is historic data for today back to midnight. However links are provided to jump to 7-
day, 28-Day data format and back to last 24 Hours, where data is available for the current period.
Task Setup
Task Setup Screen including Alarm Zones.
Fast Task setup is possible by copying an existing task either from the same transmitter or one used
from a different transmitter of the same model.
Gateway Specifications
General
Operating System – Linux
Battery Backup – 4300mAh Ni-Mh Rechargeable Battery + Reserve for orderly
shutdown.
Running time 4-6 Hours (Dependant on Specification)
Operating Range – 10-40°C, 10-90% RH non-condensing. No waterproof option available.
Data Storage – 40Gb Hard Drive for 10 Years of Data.
An external long-range antenna is fitted with variable orientation to suit vertical or horizontal
mounting of the Gateway.
Note:- Under no circumstances should the antenna be removed from the Gateway when the
Gateway is switched on as serious damage could result. If the Antenna has been removed then
the Gateway should not be switched ON.