User Manual

Gateway Commissioning

Requirements for Commissioning

• Computer with RJ45 ethernet jack.

• Ethernet cross-over cable

• Static IP address and subnet mask (Usually allocated by IT Department)

• Default gateway IP address (To enable access from different subnets)

• Email server name or IP address

• DNS server IP address (required if email server is named)

• For modem connections telephone sockets for the RF500 Gateway and PC modem plus associated leads are

required. An IP address is not required for modem only operation.

Gateway to PC Network Connection via RJ45 cross-over Ethernet Cable

1. Set up your computer temporarily with a fixed IP address using the instructions given in Appendix-A Setting a Fixed

IP Address.

2. Connect the cross-over ethernet cable between computer and RJ45 jack on the Gateway.