User Manual
Table Of Contents
- RF500 LITE System Components
- Safety Information
- RF500 LITE Wireless Monitoring System Overview
- Equipment Installation
- Powering On and Off
- Gateway Commissioning
- Gateway Programming and Use
- Gateway Specification – RF500 LITE
- Transmitters Specification – RF512, RF513 and RF516
- Changing Lithium Battery on RF512 Series Transmitters
- Pinout and Wiring
- FCC Approvals
- Equipment Ratings
- Maintenance and Cleaning
- Declaration of Conformity
- Transmitter Error Codes
- Gateway Fault Conditions
- Definitions of Gateway Terminology
- Glossary
- Document Revision History
Pinout and Wiring
These connectors are drawn from the point of view of looking into the socket from outside the
transmitter
Door Connector
A Door Positive
B RF525 Activator Positive
C Common Ground for Door and RF525
Lumberg Connector
1
2
3
4
5
6
Pin No RF512 Pinout RF516 Pinout
1 Thermistor External-2 Pt100 Positive Voltage Input
2 Thermistor External-1 Pt100 Positive Current Drive
3 Thermistor External-4 (Reserved for future use) No Connection
4 Thermistor Common Pt100 Negative Current Drive
5 Thermistor External-3 (Reserved for future use) Pt100 Negative Voltage Input
6 No Connection No Connection
Power Connector
A Positive +5 VDC
B Negative Ground
A
C
B
A
B