User's Manual
Installing the Batteries
2.4GHZ Wireless mouse use tow AAA alkaline batteries,
Installing Batteries in the Mouse
Step1. Open the battery compartment.
Step2. Insert the batteries as shown inside the battery compartment.
Step3. Replace the cover.
The receiver is connected to your computer via USB port
USB cable. And it plug to USB port of your computer.
CAUTION:
Windows 98 or higher is required for USB port installation. Connect the receiver cable to
the USB port on computer.
For Windows, you may be prompted to insert the windows software CD. Insert this software
CD into the computer’s CD-ROM driver when asked to do so. Then follow the on-screen
instruction s.
Indicators on Receiver
1 Super mini USB receiver,just plug it and
It works
2 The storable 2.4Ghz micro-receiver and
An all-terrain optical engine complete the
Feature mouse
waining
1: Do not disassemble the product or remove any parts
2: Do not put the product into water or any liquid. Should this happen, take the product off computer and contact your
vendor or after-sales service center for maintenance.
3: Do not plug and/or unplug the receiver with wet hands to avoid electric shock.
4: Do not put the product close to heat source, or expose it to high temperature.
5: Do not put the product where the electromagnetic wave is strong. Strong electromagnetic wave will cause damage to the
product or internal data.
Standard parameters of mouse emitter
1:Working frequency 2.4GHz 2:Working voltage DC3V 3: Working current 10mA
3: sleep current :100uA 4: Sleep time :13Min 5:6-10metres operation distance
Disclaimer
We have done our best to ensure the data in this user’s manual are correct and intact. We
will not take any responsibility for any error or lack in the manual. We reserve the right to alter
hardware and software mentioned in the manual without notice.
Wa rn ing
1: Do not use the wireless platfo rm while on an airplane and ensure the battery has bee n taken out of the mouse to
avoid interference with electronic equipment on an airplane.
2: Do not use the wireless p latform in a dange rous place (for e xample, gas station)
3: Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return
and collection systems or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
Software installation
The driver supports Win98/SE , Win2000 and Win XP. Vista
The driver will install automatically if the auto-run is enable in your computer. Otherwise,
you can manually launch th e installation by double clicking the file setup.exe in the
CD-ROM.
The setup applet s icon of the keyboard and the mouse will appear on the windows taskbar
after successfully completing software installation.
You can double click or right click the applet, and setup the functions of your preferred
selection for both keyboard and mouse to enhance your device
Model: CM9090G
Instruction Manual
2.4GHZ RF & Optical Mouse
CAUTION: To use this device properly, please read the
user’s guide before installation.
3') SGI)DFWRU\ ZZZILQHSULQWFQ
7KLVGHYLFHFRPSOLHVZLWK3DUWRIWKH)&&5XOHV
2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQV
7KLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQG
7KLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHG
LQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ
&KDQJHVRUPRGLILFDWLRQVQRWH[SUHVVO\DSSURYHGE\
WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKH
XVHU¶VDXWKRULW\WRRSHUDWHWKHHTXLSPHQW
)&&67$7(0(17