User's Manual

Checking the battery level
On the bottom of the mouse there is a code connection indicator
(RCV). When the LED indicator is on, it tells the user that the
batteries must be replaced or recharged. (During normal use, the
LED indicator is off.)
t light up when the
batteries are used up, replace the batteries.)
Recharging
1. e
battery compartment on the base of the receiver for recharging. (See the illustration.)
2. e
recharged. When the batteries are fully recharged, the "CH" LED indicator will go out.
3.
charging compartment on the receiver. Otherwise there is a hazard of
battery explosion.
The mouse cannot be detected.
1. Ensure that the battery level is full enough.
2. receiver in a place 8 inches or
20mm away from the monitor and the peripheral devices.
Note: In case that the LED indicator does no
A battery charger for placing on the receiver is designed by us. Place the batteries in th
Insert the rechargeable batteries into the battery compartment on the receiver, and th
recharging "CH" LED indicator will light up, indicating that the batteries are being
Do not insert alkaline batteries and non-rechargeable batteries (batteries that cannot be
recharged) in the re
To reach the maximum performance during use, place the
4