User's Manual

Checking the battery level
On the bottom of the mouse there is a code connection indicator (RCV).
When the LED indicator is on, it tells the user that the batteries must be
replaced or recharged. (During normal use, the LED indicator is off.)
Note: In case that the LED indicator does not light up when the
batteries are used up, replace the batteries.)
Recharging
1. A battery charger for placing on the receiver is designed by us. Place the batteries in the
battery compartment on the base of the receiver for recharging. (See the illustration.)
2. Insert the rechargeable batteries into the battery compartment on the receiver, and the
recharging "CH" LED indicator will light up, indicating that the batteries are being
recharged. When the batteries are fully recharged, the "CH" LED indicator will go out.
3. Do not insert alkaline batteries and non-rechargeable batteries (batteries that cannot be
recharged) in the recharging compartment on the receiver. Otherwise there is a hazard of
battery explosion.
The mouse cannot be detected.
1. Ensure that the battery level is full enough.
2. To reach the maximum performance during use, place the receiver in a place 8 inches or
20mm away from the monitor and the peripheral devices.
3. Reduce the distance between the mouse and the receiver.
4