Datasheet

CODICE – CODE:
CE0467
CARATTERISTICHE ELETTRICHE E
MECCANICHE
Electrical & Mechanical Specifications
FOGLIO - SHEET:
6 of 10
DATA – DATE:
12-03-2010
All parts included in this documentation are property of
COMATEC snc. All rights reserved. This document and
its information (or part of its) can't be reproduced or used
without an explicit written permission.
All technical specifications are
subjected to change without notice.
EDIZIONE – ISSUE:
1
st
Edition
AFFIDABILITÀ, SICUREZZA E COMPATIBILITÀ ELETTROMAGNETICA
Reliability, Safety and Electromagnetic Compatibility
Tamb=25°C, f=50Hz se non specificato altrimenti Tamb=25°C, f=50Hz unless otherwise specified
N° PARAMETRO
Parameter
CONDIZIONI
Conditions
VALORE
Value
UNITÀ
Unit
1 MTBF Vin=100-240Vac; full load 100000 h
2 Life of capacitors
3 SAFETY
- protection index
- withstand voltage
- insulation resist.
- leakage current
PRI/SEC (60 seconds)
PRI/SEC
EN60950-1
IP20
3000
> 4
< 250
Vac
Mohm
uA
4 EMI EN55022/B
5 EMS EN61000-4
6 EMC EN61000-3-2
EN61000-3-3
Note1: Mean Time Before Failures. It indicates when, according to statistics, the device will fail due to
processing or component defects. It is calculated using MIL-HDBK-217 for military or aerospace
applications.
Note2: The life of Aluminium Electrolytic Capacitors is calculated by the following formula (law of 10°C,
doubling). The life shall be a double of the calculation result. However, it shall be 1.5 times of the
calculation result for capacitors with 10mm diameter or less.
Ln = Lo * 2^((T – Tn)/10) where: Ln = estimated life hours at the Tamb
Lo = life hours of max. guaranteed temp.
T = max. guaranteed temp. Of capacitor
Tn = the case temp. Of capacitor (Tamb converted)
Note4: Conducted & Radiated Emissions requirements.
Note5: Immunity Characteristics.
Note6: Electromagnetic Compatibility. Limits for harmonic current emissions and limitation of voltage
fluctuations & flicker.