User's Manual

USER MANUAL FOR COMFLEX 6100 1W
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 26
Step 2: Attach the PSU on the wall with two M8×80 hexagon screws (Screws are provided)
Figure 21: Install PSU on the Wall
3.3.8 DRIP-LOOP
Comba recommends that every horizontal cable entry to the equipment forms a 'U' before it’s entry to the
equipment. Any accumulated water on the cable will drip down at the bottom of the loop and will not climb
up to the equipment.
3.4 EQUIPMENT CONNECTORS
The figures below present the connectors of ComFlex MU.
1
2
3
4
5
6
7 8
Figure 22: MU Front Panel Connectors