User's Manual

USER MANUAL FOR RA-5700
RA-5700 QI
Copyright - refer to title page
Page 23
ENU Status : 1-1-2
3.3.4 CABINET MOUNTING OF MU
Depending on the installation, should 2-post open-rack are to be used, the mid-mounting brackets are to
be used. For rack or cabinet mounting, the mid-mounting brackets are to be removed from the 4U shelf.
Cage nut and screws are not supplied. Unless being recommended by rack manufacturer, M5 cage nut /
bolt are to be used.
Master Unit
19" Shelf
Figure 8: Cabinet Mounting of 19” Shelf
3.3.5 RU MOUNTING RACK DIMENSION
The mounting arrangement of the RU is used for mounting the RU to a wall. The figure below shows the
location of the holes for the mounting tabs.