User Manual

INSTALLATION GUIDE FOR RX7W22
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 27
 IP Setting
Figure 19: Management – IP Setting
Note: For remote monitoring, IP Address must be set correctly based on the location IP of remote
connection. If more than one equipment is connected to the public network through the same router, the
router’s local IP CANNOT be set as 192.168.8.*.
 Comm. Setting
Figure 20: Management – Comm. Setting
Note: There are 4 communication types: SMS, PS, SNMP and ETHERNET. You can choose a suitable
type for remote monitoring.
Configure IP
address for remote
monitoring.