User Manual

INSTALLATION GUIDE FOR RX7W22
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 8
1 GENERAL INFORMATION
The RX-7W22 is a new digital dual band public safety repeater (hereafter referred to as PS BDA) designed
to protect the lives of first responders and building occupants. Through the use of digital filtering technology
(DSP), the RX-7W22 helps eliminate adjacent channel interference to allow band selectivity and support
700MHz and 800MHz rebanding. Up to two non-contiguous frequency bands can be simultaneously
supported in each of the 700MHz and 800MHz Public Safety frequencies via web-based GUI, which
provides versatility and total control to the user.
Main Features
 PS 700 and 800MHz
 Class A BDA, 32 channel per band
 Channel selective, software programmable
 Auto diagnostic
 Uplink squelch, per channel and per time slot
 User adjustable gain control, UL and DL independent per channel
 US and Canada 700MHz and 800MHz band compatible, software adjustable
 Easy commission and setup via Web-based GUI
 Weatherproof enclosure, IP65/NEMA4X
 Fully compliant with the 2010 NFPA 72 Code
 Competitive size and weight
 Alarming output to supervised circuits for: antenna failure, amplifier failure.
The following figure shows the enclosure of the PS BDA.
Figure 1: Front, Side and Bottom Views of the PS BDA Enclosure
DT MT
AC 100V-240V
50Hz/60Hz
AUX
PWR
ALM
RUN
ALM1
MT_TEST
DT_TEST
LAN
OMT
ALM2