User's Manual

INSTALLATION GUIDE FOR UHF DAS
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 20
3 INSTALLATION
3.1 WARNINGS AND ALERTS
Radio Frequency Energy
There may be situations, particularly for workplace environments near high-powered RF sources, where recommended
limits for safe exposure of human beings to RF energy could be exceeded. In such cases, restrictive measures or actions
may be necessary to ensure the safe use of RF energy.
High Voltage
The equipment has been designed and constructed to prevent danger, as far as reasonably practicable. Any work activity
on or near equipment involving installation, operation or maintenance must be, as far as reasonable, free from danger.
Where there is a risk of damage to electrical systems involving adverse weather, extreme temperatures, wet, corrosive or
dirty conditions, flammable or explosive atmospheres, the system must be suitably installed to prevent danger.
Protective Earthing
Equipment provided for the purpose of protecting individuals from electrical risk must be suitable for the purpose and
properly maintained and used.
Handling Precautions
This covers a range of activities including lifting, lowering, pushing, pulling, carrying, moving, holding or restraining an
object, animal or person from the equipment. It also covers activities that require the use of force or effort, such as pulling
a lever, or operating power tools.
Where some of the abovementioned activities are required, the equipment must be handled with care to avoid being
damaged.
Electrostatic Discharge (ESD)
Observe standard precautions for handling ESD-sensitive devices. Assume that all solid-state electronic devices are ESD-
sensitive. Ensure the use of a grounded wrist strap or equivalent while working with ESD-sensitive devices. Transport,
store, and handle ESD-sensitive devices in static-safe environments.