Instruction Manual 1 way 2 way 3 way 4 way For safety of your children, read this instruction manual carefully and use the baby carrier accordingly. After reading please keep this instruction manual for future reference. Please also attach this user guide in case the carrier is to be transferred to others to use.
Before use Thank you for purchasing Ninna Nanna 4-way 8-style baby soft carrier. This product is a general single-baby carrier designed for cradling or back-carrying the baby during shopping or outdoor activities. Before use, please read "naming of components" in page 6 and check out the parts. •This product can be applied in several carrying positions including cradling, facein cuddling, face-out cuddling and back carrying.
For your safety Caution about safety The caution items mentioned here are about how to use the product properly and safely so as to prevent any possible injury to user and baby and any damage to the product. Moreover, the caution items are categorized according to the degree of injury and damage to the product and are indicated as "Warning" and "Caution" respectively. Caution and using conditions mentioned below are very important. Please read and follow accordingly.
For your safety (continued) WARNING Before use The hook of the U-shape support must be passed through the D-ring and secured by the hook outlet while cradle position is in use. Otherwise, there is a danger that baby may fall off the carrier. Hook outlet D-ring Hook Cuddling and back carry position should not be used for baby whose neck muscle has yet to develop. Otherwise, unexpected damage will be inflicted to the baby* neck.
CAUTION In case of any damage of product found, please stop to use it to avoid accidents. Please do not leave the product near fire or unattended outside. Otherwise, the buckle or other fabric parts may be deteriorated by heat or rain and it may cause accidents while used. Please do not use this product for the purposes other than cuddling or back carrying to avoid any damage to the product.
Using styles of "4-way 8-style new birth baby carrier" There are different combinations of components below for "4-way 8-style New Birth Baby Carrier" Also, "4-way 8-style" is classified in accordance with the age of baby and using methods. Combination of product Cradle-use cushion (U-shape support) Way 1: Cradle position Base vest style 1 Before use From birth until neck muscle has developed. Length adjustment snap at lengthened state while used.
Naming of components Cradle-use cushion (U-shape support) U-shape support Head guard Hook outlet U-shape support insertion outlet Hanging hook Holding belt Crotch belt hook Protective pad Snap Protect the baby by holding belt and crotch belt. D-ring Crotch belt Cuddle-use cushion Head support belt Head support Hook cover (removable) Support the head of baby. It can be folded inside while faceout cuddling position is used.
Adjustment methods of components To ensure "New Birth Baby Carrier" to be used under the best conditions, the following is the explanation of the adjustment methods of "Base vest" and "cuddle-use cushion". Base vest Adjust the length of shoulder belt To shorten the belt, raise the buckle and pull out the end of the belt. To lengthen the belt, raise the buckle and pull back the belt.
Cradle position • Before using cradle position, user should wear the base vest and put the baby inside cradle-use cushion. • Length adjustment snap should be set at shortened state. • The installation method of U-shape support in cradle-use cushion (refer to page 9) is applicable to both left-cradling and right-cradling. The following is the explanation of leftcradling method. Right cradling Cradle-use cushion (U-shape support is installed.) Base vest (Length adjustment snap is set at shortened state.
Use of carrier by cradling Checking of Base Vest Please check the following points after wearing the base vest: 1 The part of shoulder belt near the chest should be fit to your body. 2 Length adjustment snap should be set at the shortened state. 3 Waist belt and pad should be fixed well at lower part of abdomen. Cradle position Putting a baby into cradle-use cushion.
3 Checking installation of protective pad. Make sure there is sufficient space (2-3 fingers can be inserted) between the protective pad and the baby. Please adjust the length of the holding belt if it is too tight or too loose. 1 Holding belt Passing the hook from the lower direction Cradle position Cradling a baby User should stoop down first and hold the hook of the U-shape support. Then, 1 Pass it from the lower direction through the D-ring positioned at the left-chest of the base vest.
Use of carrier by cradle position 3 D-ring stopper Cradling a baby Use your hands support the head and the hips of the baby at the same time and then raise your body to cradle the baby. Cradle position Please adjust the length of the crotch belt if you want to change the positioning angle of the baby. When the belt is in shortened state, the body of the baby will be in level position. When the belt is in lengthened state, the hip-side of the baby will be lower.
Face-in cuddling position • Cuddling position is divided into [Face-in cuddling position](P.13) and [Face-out cuddling position](P.16). • When use in cuddling position, one should put on the base vest to which the cuddle-use cushion has been attached, and then seat the baby into the carrier. • The length adjustment snap must be snapped in shortened position for either face-in or face-out position. • Newborn baby whose neck muscle has not yet developed should use in cradle position.
Face-in cuddling position 2 Face-in cuddling position 3 Secure the waist buckle (Refer to P.8 Step 1) Pull the waist belt round to the back and fasten the buckle. Adjust the belt to a suitable length. Secure the shoulder buckle (Refer to P.8 Step 2) Fit the base vest tight to your body. Round the shoulder belt to the back, cross over one with another and then fasten the buckle. Adjust the shoulder belt to suitable length. (Refer to P.
Seat the baby into the cuddle-use cushion Cuddle the baby Cuddle the baby facing in and seat it into the cuddle-use cushion. Face-in cuddling position 1 WARNING Operate at a safe place to avoid the baby from accidentally falling off. 2 Secure another safety buckle 1 Pull the safety buckle through the D-ring on the base vest from the lower side and 2 secure it back to the cuddle-use cushion.
Face-in cuddling position 5 Secure the head support hook Secure the head support hooks, one at each side, to the outlets on the base vest until a "Click" sound is heard. Outlet for head support hook Head support hook Face-in cuddling position Detaching the head support hook Reverse the steps to detach the head support hook. Click To release the head support hook 1 Secure the outlet with the thumb. 2 Lift and open the head support hook.
Face-out cuddling position Preparing the base vest Put on the base vest referring to [face-in cuddling position] step 1 to step 3 (P.12~). way 3 Tighten the crotch part of the cuddle-use cushion Width adjustment snap Secure the width adjustment snap to tighten the crotch part of the cuddle-use cushion. CAUTION Make sure to adjust the crotch part or it may cause discomfort to the baby.
Face-out cuddling position 2 Face-out cuddling position 3 Secure another safety buckle Pull the safety buckle through the D-ring on the base vest from the lower side and secure it back to the cuddle-use cushion. WARNING Safety belt must be tightened The baby may have chance to fall off if the gap between the baby and parent is too large, or if the length of the left and the right belt end are different from each other.
Back carry position • When use in cuddling position, one should put on the base vest to which the cuddle-use cushion has been attached, and then seat the baby into the carrier. • The length adjustment snap must be snapped in extended position. • Newborn baby whose neck muscle has not yet developed should use in cradle position.
Back carry position 4 Secure the shoulder buckle Fit the base vest tight to your body. Round the shoulder belt to the back, cross over one with another and then fasten the buckle. Adjust the shoulder belt to suitable length. (Refer to P.7 to adjust the shoulder belt) Shoulder belt Shoulder buckle Back carry Checking of base vest Please check the following points after wearing the base vest: 1 Shoulder belt should fit tight to your shoulders.
Seat the baby to the cuddle-use cushion 1 Cuddle the baby Cuddle the baby facing in and seat it into the cuddle-use cushion. Base vest WARNING Back carry Operate at a safe place and pay attention in case the baby may fall off accidentally. 2 Secure another safety buckle 1 Pull the safety buckle through the D-ring on the base vest from the lower side and 2 secure it back to the cuddle-use cushion.
Back carry position 4 Secure the head support hook Outlet for head support hook Secure the head support hooks, one at each side, to the outlets on the base vest until a "Click" sound is heard. Click Adjust the head support belt and set the belt end as demonstrated. Back carry Head support hook WARNING Make sure to set the head support belt. Belt that is too loose may cause the baby to fall off accidentally during use.
2 Secure the waist buckle Pull the waist belt round to the front and fasten the buckle. Adjust the belt to a suitable length. Waist buckle Detaching the waist buckle Reverse the steps to detach the waist buckle. Back carry Back carry position completed Use the belt stopper to secure the belt end. Make sure to secure the belt end into the belt stopper in back carry position.
