Instruction manual

Cradle position
Use of carrier by cradling
9
Please check the following points after wearing the base vest:
The part of shoulder belt near the chest should be fit to
your body.
Length adjustment snap should be set at the shortened
state.
Waist belt and pad should be fixed well at lower part of
abdomen.
1
2
3
Putting a baby into cradle-use cushion.
1
When a baby is put in sleeping position:
Please place the hip of baby at the "Hip
seat of baby" as illustrated.
Put a baby in sleeping position
and fix the holding belt.
Put a baby in sleeping position inside cradle-
use cushion placed at a safe place. Lay the
protective pad on the baby and pass the holding
belt through the belt insertion outlet. Use the
buckle to fix the position.
2
Illustration below is based on left-cradling.
Prepare cradle-use cushion and
U-shape support
Take the D-ring of the U-shape support first
and then insert it into the insertion outlet of
cradle-use cushion (Same for right-cradling).
Use the snap to fix the position (both sides)
•
Left-cradling
•
Right-cradling
U-shape
support
Snap
Hip seat of baby
Protective pad
Holding belt
Belt insertion outlet
WARNING
Please ensure the "Buckle of the holding
belt" is fixed well to prevent the baby from
falling down.
Checking of Base Vest