Instruction manual

14
Face-in cuddling position
1
Make sure to leave a gap of around
2 ~ 3 adult fingers width in between
the holding belt and the baby. Adjust
the belt when it is too loose or too tight.
Secure another safety buckle
Pull the safety buckle through the D-ring
on the base vest from the lower side and
secure it back to the cuddle-use cushion.
2
Cuddle the baby
Cuddle the baby facing in and seat it into the
cuddle-use cushion.
1
2
3
Secure the holding buckle
Set the holding buckle on the cuddle-use
cushion through the parent and the base
vest and secure it firmly.
Seat the baby into the cuddle-use cushion
WARNING
Operate at a safe place to avoid the baby
from accidentally falling off.
WARNING
Safety belt must be tightened
The baby may have chance to fall off if
the gap between the baby and parent is
too large, or if the length of the left and
the right belt end are different from each
other.
D-ring
Safety buckle
Holding belt
Holding buckle