Instruction manual

Before use
Adjustment methods of components
7
To ensure "New Birth Baby Carrier" to be used under the best conditions, the following is the
explanation of the adjustment methods of "Base vest" and "cuddle-use cushion".
Base vest
Shoulder belt
Shoulder buckle
Length adjustment snap
To shorten the belt, raise the buckle
and pull out the end of the belt.
To lengthen the belt, raise the
buckle and pull back the belt.
Length adjustment snap can be used to change the length of vest for
"Cuddling" or "Back carrying" mode.
Shoulder buckle Shoulder buckle
Lengthened state <back carrying>Shortened state <cuddling>
Cuddle-use cushion
If the shoulder of baby is pressed by head support belt of cuddle-use cushion,
please lengthen the depth adjustment belt to enlarge the size of cushion.
Depth adjustment belt
1
Draw out the depth adjustment belts from both
sides in same length.
Pull out the end of the cloth.
2
In case of using under
face-out cuddling position,
use the width adjustment
snap to decrease the
width size in order to
prevent blood congestion
on thigh of the baby.
Face-out cuddling position
Narrow state
Face-in cuddling position
Back carry position
Wide state
Width adjustment snap
Depth adjustment belt
Adjust the length of shoulder belt
Adjust length adjustment snap
Adjust the length of depth adjustment belt
Adjust width adjustment snap